Services / Usługi
Co robię
Robię to z Lublina, sam. Druk, obróbka, malowanie – wszystko w jednym miejscu. Piszesz do mnie, gadamy o projekcie, ja go drukuję. Żadnych pośredników.
🖨️ Druk 3D FDM
Używam kilku drukarek – każda do czegoś innego. Do dużych, masywnych wydruków idą Qidi i Ender. Do mniejszych projektów gdzie liczy się detal – Bambu Lab. A do multikoloru mam Snapmaker U1, który przy zmianie kolorów marnuje znacznie mniej materiału niż reszta. Dobór maszyny to moja sprawa, nie Twoja.
Drukuję figurki, elementy pancerzy cosplay, hełmy, miecze, tarcze, dekoracje, reliefy, części użytkowe i prototypy. Jeśli mieści się w wymiarach – dam radę. Większe projekty muszą być zaprojektowane z podziałem na sekcje – wtedy też nie ma problemu.
Materiały: PLA, PETG, ABS. Dobieram pod projekt.
Rozmiary, które mogę zaoferować:
| Co drukujesz | Dostępny rozmiar |
|---|---|
| Figurki, gadżety, małe modele | do 25 × 25 × 25 cm |
| Większe modele, obudowy, części | do 39 × 39 × 34 cm |
| Hełmy, tarcze, droidy, duże rekwizyty | do 40 × 40 × 40 cm |
| Większe projekty | sekcje + składanie |
Hełm często wychodzi w jednym kawałku. Bez klejonek na czole i szwów przez środek.
Druk wielokolorowy
Do koloru mam dwie drogi. Bambu Lab H2S i Qidi Max 4 dają duże pole robocze i kilka kolorów w jednym wydruku – przy zmianie filamentu powstaje trochę odpadów, ale to standard w tej klasie maszyn, a rozmiar nie jest ograniczeniem. Snapmaker U1 ma mniejszy stół, za to dużo mniej zmarnowanego materiału przy przełączaniu – lepsza opcja na figurki, odznaki i logotypy, gdzie kolory są drobne i muszą trafić w konkretne miejsce. Którą wybrać? Opisz projekt, dobiorę sam.
Kilka przykładów z portfolio, żebyś wiedział, że to nie są puste słowa: pancerze Helldivers, miecz Monado z Xenoblade Chronicles (część 2), hełm Mandalorianina w pełnym rozmiarze, Christmas Droid, Bombardier i Leaper z Arc Riders.
🎨 Wykańczanie i malowanie
Surowy wydruk wygląda jak surowy wydruk. Żeby wyglądał jak coś, czym warto się pochwalić – trzeba go obrobić: szlifowanie, usuwanie szwów, primer, malowanie akrylowe lub z aerozolu, weathering, lakier. Składam też projekty wieloczęściowe.
Jestem samoukiem i nie udaję studia z airbrushami. Moje prace są uczciwe – sprawdź portfolio zanim zdecydujesz.
🛡️ Zbroje i rekwizyty
To lubię najbardziej. Pełnowymiarowe zestawy pancerzy i rekwizyty drukowane sekcjami, składane, wykończone i pomalowane. Robiłem elementy pancerza Helldivers, postacie z Arc Riders (Bastion, Bombardier, Leaper), miecz Monado z Xenoblade Chronicles, figurki i reliefy Kapitan Bomba.
Masz konkretną postać albo grę w głowie? Napisz – coś wymyślimy.
📦 Jak zamówić
Wyślij mi referencję, link do STL albo opis co chcesz. Wrócę z wyceną – rozmiar, materiał, czas druku, wykończenie. Potem produkcja i dostawa po Polsce. Odbiór w Lublinie też działa.
📧 [email protected] · LinkedIn · Instagram · Facebook · Discord
🛒 Gotowe produkty
Nie wszystko musi być na zamówienie. Gotowe wydruki znajdziesz na Allegro, Erli i Vinted. Napisz jeśli szukasz czegoś konkretnego.
❓ FAQ
Jakie formaty plików przyjmujesz?
STL, OBJ, 3MF. Nie masz pliku? Opisz co chcesz – pomogę znaleźć model.
Ile czeka się na realizację?
Małe wydruki to 1–3 dni. Duże projekty z wykończeniem – 1–3 tygodnie, zależy od złożoności.
Czy wysyłasz poza Polskę?
Skupiam się na Polsce, ale przy większych zamówieniach EU shipping można ustalić.
Mogę zobaczyć wcześniejsze prace?
Tak – galeria na stronie albo Instagram.
Co z prawami autorskimi?
Jeśli przysyłasz mi STL, drukuję. Skąd masz plik – to Twoja sprawa.
What I Offer
I provide custom 3D printing services from my print farm in Lublin, Poland. From small figurines to oversized props and armor pieces — if it can be printed, sanded, and painted, I'm your guy. Every piece is handled by me personally, start to finish. No outsourcing, no anonymous factory line.
🖨️ 3D Printing (FDM)
I use several printers — each one for a different job. Big, chunky builds go on the Qidi and Ender. Smaller projects where detail matters get the Bambu Lab treatment. And for multicolor I have the Snapmaker U1, which wastes a lot less material on color switches than the others. Which machine fits your project — that's my call, not yours.
I print figurines, cosplay armor parts, helmets, swords, shields, decorative pieces, reliefs, functional parts, and prototypes. If it fits the build volume, we're good. Bigger projects need to be designed with sections in mind — when they are, that's fine too.
Materials: PLA, PETG, ABS. Picked per project.
Build sizes available:
| What you're printing | Available size |
|---|---|
| Figures, gadgets, small models | up to 25 × 25 × 25 cm |
| Larger models, enclosures, parts | up to 39 × 39 × 34 cm |
| Helmets, shields, droids, large props | up to 40 × 40 × 40 cm |
| Even bigger | sections + assembly |
A full helmet often comes out in one piece. No glue seam across the forehead, no visible split down the middle.
Multicolor printing
Two options depending on what you need. The Bambu Lab H2S and Qidi Max 4 handle larger builds with multiple colors — there's some material waste when switching filaments, that's just how this type of setup works, but size isn't a constraint. The Snapmaker U1 has a smaller build area but wastes far less material on color changes, which makes it the better pick for figures, badges, logos — anything where colors are small and placement matters. Not sure which fits your project? Describe it, I'll figure it out.
A few things from the portfolio so this isn't just words: Helldivers armor, Xenoblade Chronicles Monado sword (part 2), full-scale Mandalorian helmet, Christmas Droid, Bombardier and Leaper from Arc Riders.
🎨 Finishing & Painting
A raw print looks like a raw print. Getting it to look like something worth displaying takes work: sanding, seam removal, filler primer, acrylic and spray painting, weathering effects, clear coat, assembly of multi-part builds.
Fair warning: I'm self-taught and not pretending to be an airbrushed studio. My work is honest — check the portfolio before you decide.
🛡️ Armor & Props
This is what I enjoy most. Full-size armor sets and prop weapons, printed in sections, assembled, finished, and painted. Past work includes Helldivers armor pieces, Arc Riders characters (Bastion, Bombardier, Leaper), the Xenoblade Chronicles Monado sword, and Kapitan Bomba figurines and reliefs.
Have a specific character or game in mind? Send me a message — I'll figure something out.
📦 How to Order
Send me a reference image, an STL link, or just describe what you want. I'll come back with a quote covering size, material, print time, and finishing. Then production, and delivery across Poland — pickup in Lublin also works.
📧 [email protected] · LinkedIn · Instagram · Facebook · Discord
🛒 Ready-Made Items
Not everything needs to be custom. I sell ready-made prints and finished pieces on Allegro, Erli, and Vinted. Browse what's available or message me if you're looking for something specific.
❓ FAQ
What file formats do you accept?
STL, OBJ, 3MF. No file? Describe what you need and I can help source a model.
How long does it take?
Small prints: 1–3 days. Large or XXL builds with finishing: 1–3 weeks depending on complexity.
Do you ship outside Poland?
Currently focused on Poland, but EU shipping can be arranged for larger orders.
Can I see your work before ordering?
Yes — browse the gallery or check my Instagram.
What about copyright / licensed models?
If you send me an STL, I print it. Where you got the file is your business.